CALL: A.WIHARTA 081294124885 085778084789 087784022201   Info Produk The Fluke 1630 uses the Stakeless testing method, which eliminates the need to disconnect parallel ground rods and find suitable locations for placing auxiliary ground stakes. This saves time and enables users such as industrial and utility electricians, and field service electricians and contractors, to perform earth ground loop tests in locations where it is not possible to use other techniques, including inside buildings or on power pylons. With the Stakeless testing method, earth ground stakes are no longer necessary. The Fluke 1630 Earth Ground Clamp is placed around the earth ground rod or the connecting cable. A known voltage is induced by one half of the clamp and the current is measured by the other half. The tester automatically determines the ground loop resistance at this grounding connection. Features: A wide ground loop resistance range, from 0.025 O to1500 O, to satisfy all requirements Large jaw opening of 35 mm ( 1.38 in) for tests on ground conductors and/ or equipotential bus bars Measurement of ground leakage current, from 0.2 mA to 1000 mA, without needing to disconnect - ideal for system troubleshooting Wide ac current measurement range from 0.2 A to 30 A allows one instrument for multiple applications User-defined HI / LO Alarm limits, for rapid measurement evaluation Handy ‘ display hold’ button for capturing readings in hard-to-reach places Time saving memory function automatically records and stores measured values Automatic self calibration ensures correct measurement every time Overload protection: 200 A Carrying case and resistance test loop included e 8 hours battery life ( continuous operation) Applications: Earth Ground loop testing in various installations - for example, high voltage pylons, buildings, cell phone substations, RF transmitters, etc. Inspection of lightning protection systems Leakage current measurement